Business::Small Business

IPhone App Development Company In USA, UAE & UK

Organizations are fascinated about mobile application as a gainful promoting procedure and a product instrument that streamlines enterprise-fundamental procedures. Our created iPhone utility will help your business in abusing the power of versatility to extend the worth of your corporation. Considering wants of varied industry verticals, we work in creating unusual and practical functions fuelling totally different fashions together with iPhone 6, בניית אפליקציות לאנדרואיד iPhone 6 Plus, בניית אפליקציה iPhone 5 and iPhone 5S.

iPhone Application Demand, מפתחי אפליקציות coupled with iPhone sport improvement is one in all our speciality that strive us one among the highest notch iphone application development company in USA,UAE & UK that may lengthen the innovation as iPhone and עלות פיתוח אפליקציות iPad app growth with devoted iOS app builders. From native Mobile App Development to cross platform app development inclusive of xamarin and מחיר לפיתוח אפליקציות phonegap app improvement , בניית אפליקציות לאנדרואיד we are striving optimum innovation and success. We are catered into Android app Development as nicely which is inclusive android tablet app development with competent android app builders. We additionally cater into net improvement with intrigue php builders in order to increase finish-to-finish help to correspond the agile ecosystem.

SOA Design Patterns: Managers, Engines, Gateways, Interfaces And Microservices

Remember that every component of this sample is a service in its personal right, and might be hosted independently or מפתחי אפליקציות as a cohesive bundle or container. They observe a bounded context pattern, מפתחי אפליקציות in a bounded context sample each mannequin has a context, the primary concept is to outline the scope of a model, to attract up the boundaries of its context, and to attempt to keep it unified. In a growth the place an Enterprise Service Bus Pattern is being utilized the channel layer may turn into optionally available if the Service Bus assumes the duty of resolving the applying particular safety requests and validation of the info flowing over the Bus. An example would be a derived attribute on a contract, the underlying schema wouldn’t store the derived information it could be calculated and added to the contract throughout the transformation from schema to contract. It is right here that the impedance mismatch between schema and בניית אפליקציות לאנדרואיד area is resolved. An attention-grabbing statement here is how the idea of the domain has changed from object orientation to service orientation, one is not passing objects with state and behaviour, with service orientation you go solely the state as a message and delegate the behaviour to the service.

Gateways try to encapsulate their own illustration of the area as they want it to be for the interplay that they require with it. Gateways are chargeable for the data access and contract transformation between the above layers and the info retailer. We use the term aggregates to describe the state of affairs as your entire group is taken into account one unit with regard to knowledge changes. Manager components are targeted on implementing the work-stream or business process for the use case to which it’s aligned and should determine the API uncovered to its shoppers. Managers are prime candidates for פיתוח אפליקציות the introduction of labor-movement expertise; this may permit a extra visible programming expertise, aiding maintenance and understanding of the system. On this model calls between the managers and engines or manager and gateway might be synchronous and utilize transactions, however manager to manager calls are always asynchronous. In the scenario where a client calls a channel, it is feasible to have the info Contracts validate the data that is sure to them, in case you own the consumer interface (UI) parts as nicely because the service connector it is possible to mix the two methods to leverage the .Net framework to do shopper side validation on enter, and then use the identical mechanism to reject invalid input on the connector earlier than any service operations have been invoked.

We work together with the base contract Consumer and resolve the calls to the other contracts throughout the ClientGateway. So when something apart from .Web calls the service, they won’t have validation, however the service will always validate. It’s normal to have a gateway per data contract, for contracts which might be composed of a number of contracts we still have a gateway for each contract; we merely interact with the composed contracts from the base or container contract, בניית אפליקציה in information driven design phrases consider this as an aggregate root. One of the simplest ways of using the validation is by both sides being .Internet, but if some other know-how calls the service, as soon as that call hits the channel and the WCF stack has translated the contract we essentially have a .Internet contract again, and validation will continue as normal. Synchronous calls between managers, and by default Channels, as they implement the managers interface, are forbidden, if a manager must call another supervisor they are going to use the publish/subscribe utility using an asynchronous queued protocol, we apply an occasion pushed paradigm in the implementation of this. This aids system validation as it is straightforward to see what a system does by looking on the managers.

Docker and Kubernetes are examples of software which may assist you handle this idea in practice. Brokers are a specialization of Gateways, Agents call other services, a hold the proxy to that different service, they typically only implement IMapper, which is used to map the other companies contract to the contract we anticipate in our application. The factoring of providers into a container/capability bunker is a discipline in its own right, involved events ought to read Roger Sessions works regarding this, בניית אפליקציה I would counsel beginning with Simple Architectures for Complex Enterprises earlier than progressing to the Software Fortress e book. The container/functionality bunker is our unit of hosting, it translates to a file that packages all the associated services together and permits an IT Skilled to put in it on the host server. Keeping them isolated in their own element permits the developer to more easily locate and replace the business rule code without needing to test in many locations throughout the structure. No data entry code should reside outdoors the info entry layer.

The engine parts encapsulate the business guidelines that support the business course of. This is to not be confused with the kind of logic that’s found in engines, engines exist to encapsulate enterprise logic volatility, in order that logic is gleaned from the business, the type of logic right here is because of our alternative of implementation and is unlikely to be as volatile because the engine logic. They contain the business guidelines and logic across the strategy that they encapsulate. The channel exists to isolate the enterprise logic from needing to know concerning the service boundary specifics. They do validations and throw enterprise exceptions. Each element of the mannequin is service and each has a effectively outlined structure, they may differ only in implementation and composition between different initiatives and domains. Once once more, a very good article on SAO. Notice that in the above instance the manager operation is controlling the move of events, not implementing them. These sorts of problems rarely occur in the development part, however moderately a number of months or years into production, my advice is to never try to optimize to early, solve the problem when it manifests itself. When last did anyone write a disk crash exception?

Robot welding firm K-TIG to debut on ASX

The world’s first welding-as-a-service company is set to launch its CSIRO-developed technology onto the ASX next week.

Adelaide-based K-TIG offers precision robotic welding that it claims saves time, materials and money.

Blue-chip firms GE, Siemens and Bilfinger are among clients in 20 countries already making use of a system that chief executive David Williams says can perform a three-hour tungsten inert gas (TIG) weld in just two or three minutes.

“In one pass, we can put the (welding) arc through the keyhole,” Mr Williams said.

“There’s a lot of advantage for fabricators of stainless steel and more exotic metals.”

Unlike conventional TIG welding, the K-TIG or “keyhole TIG” system requires no edge bevelling of the materials to be welded together, and doesn’t use as much expensive filler material.

The system is being used for making pressure vessels, ISO tanks for shipping liquids, pressure vessels and stainless steel welded pipes, the company says.

Mr Williams said one client in Argentina used it to deliver 15km of pipeline 550 days ahead of schedule.

K-TIG was developed by CSIRO’s former Division of Manufacturing Technologies and was named Australia’s industrial product of the year in 2014.

Mr Williams said that people in the industry have at first scoffed at the company’s “welding as a service” model.

But when they see customers paying only a variable fee depending on the size of the task, “they say that’s fantastic – there’s no one doing this in the industry,” Mr Williams said

TIG welding is complex and more difficult to master than other types of welding, and welders used to working with exotic materials such as titanium and various alloys tend to be in their fifties, Mr Williams said.

“All the people that used to do welding of exotic materials are disappearing,” he said.

The K-TIG system lets customers in high-wage countries like the US, UK and Australia compete with Asia, he said.

“They can compete on cost, with better quality and faster time of delivery,” Mr Williams said.

The K-TIG system is also an “internet of things” device, communicating with the K-TIG headquarters in Adelaide.

Mr Williams said the company can monitor customers’ use of the system in real time, making sure they are using it correctly and automatically storing the details of each weld in K-TIG’s computers.

“It’s a really exciting development,” Mr Williams said.

So far though, K-TIG hasn’t been profitable, reporting a $1.7 million loss for the 12 months to June 30, up from a $458,302 loss the previous year.

It had $1 million in revenue, down from $2.2 million in FY18, as it transitions to its welding-as-a-service model.

Mr Williams said prospective investors are not going to be “blown out of the water” with the company’s revenue but the licensing model would give it a monthly recurring income.

K-TIG plans to backdoor list on Monday through Perth shell company Serpentine Technologies following a $7 million capital raise.

Shareholders will be hoping that precision welding is more successful than the corporate entity’s previous businesses.

It first listed as WA base metals explorer Magnolia Resources in 2012, then acquired an interior design e-commerce platform and changed its name to Whole New Home in 2015, and then changed its name to Kabuni the following year.

In 2017, Kabuni sold most of its assets to Print the Future, a new company owned by former chief executive Neil Patel, but Print the Future has failed to repay the $4.4 million promissory note, according to numerous ASX filings.

Advertisement

Robot welding firm K-TIG to debut on ASX

The world’s first welding-as-a-service company is set to launch its CSIRO-developed technology onto the ASX next week.

Adelaide-based K-TIG offers precision robotic welding that it claims saves time, materials and money.

Blue-chip firms GE, Siemens and Bilfinger are among clients in 20 countries already making use of a system that chief executive David Williams says can perform a three-hour tungsten inert gas (TIG) weld in just two or three minutes.

“In one pass, we can put the (welding) arc through the keyhole,” Mr Williams said.

“There’s a lot of advantage for fabricators of stainless steel and more exotic metals.”

Unlike conventional TIG welding, the K-TIG or “keyhole TIG” system requires no edge bevelling of the materials to be welded together, and doesn’t use as much expensive filler material.

The system is being used for making pressure vessels, ISO tanks for shipping liquids, pressure vessels and stainless steel welded pipes, the company says.

Mr Williams said one client in Argentina used it to deliver 15km of pipeline 550 days ahead of schedule.

K-TIG was developed by CSIRO’s former Division of Manufacturing Technologies and was named Australia’s industrial product of the year in 2014.

Mr Williams said that people in the industry have at first scoffed at the company’s “welding as a service” model.

But when they see customers paying only a variable fee depending on the size of the task, “they say that’s fantastic – there’s no one doing this in the industry,” Mr Williams said

TIG welding is complex and more difficult to master than other types of welding, and welders used to working with exotic materials such as titanium and various alloys tend to be in their fifties, Mr Williams said.

“All the people that used to do welding of exotic materials are disappearing,” he said.

The K-TIG system lets customers in high-wage countries like the US, UK and Australia compete with Asia, he said.

“They can compete on cost, with better quality and faster time of delivery,” Mr Williams said.

The K-TIG system is also an “internet of things” device, communicating with the K-TIG headquarters in Adelaide.

Mr Williams said the company can monitor customers’ use of the system in real time, making sure they are using it correctly and automatically storing the details of each weld in K-TIG’s computers.

“It’s a really exciting development,” Mr Williams said.

So far though, K-TIG hasn’t been profitable, reporting a $1.7 million loss for the 12 months to June 30, up from a $458,302 loss the previous year.

It had $1 million in revenue, down from $2.2 million in FY18, as it transitions to its welding-as-a-service model.

Mr Williams said prospective investors are not going to be “blown out of the water” with the company’s revenue but the licensing model would give it a monthly recurring income.

K-TIG plans to backdoor list on Monday through Perth shell company Serpentine Technologies following a $7 million capital raise.

Shareholders will be hoping that precision welding is more successful than the corporate entity’s previous businesses.

It first listed as WA base metals explorer Magnolia Resources in 2012, then acquired an interior design e-commerce platform and changed its name to Whole New Home in 2015, and then changed its name to Kabuni the following year.

In 2017, Kabuni sold most of its assets to Print the Future, a new company owned by former chief executive Neil Patel, but Print the Future has failed to repay the $4.4 million promissory note, according to numerous ASX filings.

Advertisement

Robot welding firm K-TIG to debut on ASX

The world’s first welding-as-a-service company is set to launch its CSIRO-developed technology onto the ASX next week.

Adelaide-based K-TIG offers precision robotic welding that it claims saves time, materials and money.

Blue-chip firms GE, Siemens and Bilfinger are among clients in 20 countries already making use of a system that chief executive David Williams says can perform a three-hour tungsten inert gas (TIG) weld in just two or three minutes.

“In one pass, we can put the (welding) arc through the keyhole,” Mr Williams said.

“There’s a lot of advantage for fabricators of stainless steel and more exotic metals.”

Unlike conventional TIG welding, the K-TIG or “keyhole TIG” system requires no edge bevelling of the materials to be welded together, and doesn’t use as much expensive filler material.

The system is being used for making pressure vessels, ISO tanks for shipping liquids, pressure vessels and stainless steel welded pipes, the company says.

Mr Williams said one client in Argentina used it to deliver 15km of pipeline 550 days ahead of schedule.

K-TIG was developed by CSIRO’s former Division of Manufacturing Technologies and was named Australia’s industrial product of the year in 2014.

Mr Williams said that people in the industry have at first scoffed at the company’s “welding as a service” model.

But when they see customers paying only a variable fee depending on the size of the task, “they say that’s fantastic – there’s no one doing this in the industry,” Mr Williams said

TIG welding is complex and more difficult to master than other types of welding, and welders used to working with exotic materials such as titanium and various alloys tend to be in their fifties, Mr Williams said.

“All the people that used to do welding of exotic materials are disappearing,” he said.

The K-TIG system lets customers in high-wage countries like the US, UK and Australia compete with Asia, he said.

“They can compete on cost, with better quality and faster time of delivery,” Mr Williams said.

The K-TIG system is also an “internet of things” device, communicating with the K-TIG headquarters in Adelaide.

Mr Williams said the company can monitor customers’ use of the system in real time, making sure they are using it correctly and automatically storing the details of each weld in K-TIG’s computers.

“It’s a really exciting development,” Mr Williams said.

So far though, K-TIG hasn’t been profitable, reporting a $1.7 million loss for the 12 months to June 30, up from a $458,302 loss the previous year.

It had $1 million in revenue, down from $2.2 million in FY18, as it transitions to its welding-as-a-service model.

Mr Williams said prospective investors are not going to be “blown out of the water” with the company’s revenue but the licensing model would give it a monthly recurring income.

K-TIG plans to backdoor list on Monday through Perth shell company Serpentine Technologies following a $7 million capital raise.

Shareholders will be hoping that precision welding is more successful than the corporate entity’s previous businesses.

It first listed as WA base metals explorer Magnolia Resources in 2012, then acquired an interior design e-commerce platform and changed its name to Whole New Home in 2015, and then changed its name to Kabuni the following year.

In 2017, Kabuni sold most of its assets to Print the Future, a new company owned by former chief executive Neil Patel, but Print the Future has failed to repay the $4.4 million promissory note, according to numerous ASX filings.

Advertisement

Understanding the Primary Difference between Seamless Pipes and ERW Stainless Steel Pipes

Pipes are ubiquitous and are pragmatically found in all industrial sectors majorly. The advent of rolling mill technology and its development during the first half of the nineteenth century also heralded in the industrial manufacture of tube and pipe. As the century was on the last leg of completion various processes became available for the manufacture of seamless pipes and tubes. As the production volume started increasing rapidly, the ongoing development and further improvement of the seamless techniques led to welded ERW tube being almost completely pushed out of the market.

As the requirements imposed on tubular products continued to increase, the associated manufacturing processes also started getting improved. There are lots of mechanical and operational differences these welded stainless steel pipes and MS seamless pipes have. Let's have a look.

Have A Look At The Key Differences Between Seamless Pipes And Stainless Steel Welded Pipes:

  • Manufacturing Difference: Seamless tubes which are also called as CDS pipes i.e. cold drawing pipe is made from solid round steel "billet" which is heated and pushed over a form until the steel is shaped in the hollow tube. They are manufactured by extruding the metal to desired length. They do not have any joint in its cross section throughout its length.

Whereas, ERW pipes are electric resistance welded pipes which are manufactured by rolling metal and which is then welded longitudinally across its length. They have a welded joint in its cross section.

  • Differences in Welding Process: In seamless tube welding or joints do not exist. It is manufactured from solid round billets. Whereas, ERW are welded longitudinally and manufactured from strip/coil.
  • Size: Seamless tubes are finished to dimensional and wall thickness specifications in which the sizes ranges from 1/8 inch to 26 inch outer diameter. While ERW pipes can be manufactured up to 24 inches outer diameter.
  • Applications: Seamless tubes are applicable for high pressure applications such as in industries like oil and gas exploration, oil drilling, oil and gas transportation, hydrocarbon industries and refineries. They are also used for hydraulic cylinders, boilers and automobiles. While welded stainless steel pipes are used in low pressure or medium pressure applications such as transportation of water and oil and various other engineering purposes like fencing, scaffolding, line pipes etc.

Nowadays, the tube and pipe manufacturers of renowned brand like MS seamless pipe have a system in place that enables the production process from the steelworks to the finished tube that is continuously monitored and documented for total traceability. Also, they are effectively controlled on the basis of quality criteria. They also carry out mechanical and non-destructive tests stipulated in the relevant technical specifications by personnel from production control department which assures the pipes produced are of high quality and totally reliable.

So, if you are looking to buy seamless pipes for your specific industrial need then always buy it from an industrial megastore which assorts and sells only branded quality of seamless tubes like MS seamless pipes. There are more chances to get discount on these pipes, if you buy them online.

Understanding the Primary Difference between Seamless Pipes and ERW Stainless Steel Pipes

Pipes are ubiquitous and are pragmatically found in all industrial sectors majorly. The advent of rolling mill technology and its development during the first half of the nineteenth century also heralded in the industrial manufacture of tube and pipe. As the century was on the last leg of completion various processes became available for the manufacture of seamless pipes and tubes. As the production volume started increasing rapidly, the ongoing development and further improvement of the seamless techniques led to welded ERW tube being almost completely pushed out of the market.

As the requirements imposed on tubular products continued to increase, the associated manufacturing processes also started getting improved. There are lots of mechanical and operational differences these welded stainless steel pipes and MS seamless pipes have. Let's have a look.

Have A Look At The Key Differences Between Seamless Pipes And Stainless Steel Welded Pipes:

  • Manufacturing Difference: Seamless tubes which are also called as CDS pipes i.e. cold drawing pipe is made from solid round steel "billet" which is heated and pushed over a form until the steel is shaped in the hollow tube. They are manufactured by extruding the metal to desired length. They do not have any joint in its cross section throughout its length.

Whereas, ERW pipes are electric resistance welded pipes which are manufactured by rolling metal and which is then welded longitudinally across its length. They have a welded joint in its cross section.

  • Differences in Welding Process: In seamless tube welding or joints do not exist. It is manufactured from solid round billets. Whereas, ERW are welded longitudinally and manufactured from strip/coil.
  • Size: Seamless tubes are finished to dimensional and wall thickness specifications in which the sizes ranges from 1/8 inch to 26 inch outer diameter. While ERW pipes can be manufactured up to 24 inches outer diameter.
  • Applications: Seamless tubes are applicable for high pressure applications such as in industries like oil and gas exploration, oil drilling, oil and gas transportation, hydrocarbon industries and refineries. They are also used for hydraulic cylinders, boilers and automobiles. While welded stainless steel pipes are used in low pressure or medium pressure applications such as transportation of water and oil and various other engineering purposes like fencing, scaffolding, line pipes etc.

Nowadays, the tube and pipe manufacturers of renowned brand like MS seamless pipe have a system in place that enables the production process from the steelworks to the finished tube that is continuously monitored and documented for total traceability. Also, they are effectively controlled on the basis of quality criteria. They also carry out mechanical and non-destructive tests stipulated in the relevant technical specifications by personnel from production control department which assures the pipes produced are of high quality and totally reliable.

So, if you are looking to buy seamless pipes for your specific industrial need then always buy it from an industrial megastore which assorts and sells only branded quality of seamless tubes like MS seamless pipes. There are more chances to get discount on these pipes, if you buy them online.

Robot welding firm K-TIG to debut on ASX

The world’s first welding-as-a-service company is set to launch its CSIRO-developed technology onto the ASX next week.

Adelaide-based K-TIG offers precision robotic welding that it claims saves time, materials and money.

Blue-chip firms GE, Siemens and Bilfinger are among clients in 20 countries already making use of a system that chief executive David Williams says can perform a three-hour tungsten inert gas (TIG) weld in just two or three minutes.

“In one pass, we can put the (welding) arc through the keyhole,” Mr Williams said.

“There’s a lot of advantage for fabricators of stainless steel and more exotic metals.”

Unlike conventional TIG welding, the K-TIG or “keyhole TIG” system requires no edge bevelling of the materials to be welded together, and doesn’t use as much expensive filler material.

The system is being used for making pressure vessels, ISO tanks for shipping liquids, pressure vessels and stainless steel welded pipes, the company says.

Mr Williams said one client in Argentina used it to deliver 15km of pipeline 550 days ahead of schedule.

K-TIG was developed by CSIRO’s former Division of Manufacturing Technologies and was named Australia’s industrial product of the year in 2014.

Mr Williams said that people in the industry have at first scoffed at the company’s “welding as a service” model.

But when they see customers paying only a variable fee depending on the size of the task, “they say that’s fantastic – there’s no one doing this in the industry,” Mr Williams said

TIG welding is complex and more difficult to master than other types of welding, and welders used to working with exotic materials such as titanium and various alloys tend to be in their fifties, Mr Williams said.

“All the people that used to do welding of exotic materials are disappearing,” he said.

The K-TIG system lets customers in high-wage countries like the US, UK and Australia compete with Asia, he said.

“They can compete on cost, with better quality and faster time of delivery,” Mr Williams said.

The K-TIG system is also an “internet of things” device, communicating with the K-TIG headquarters in Adelaide.

Mr Williams said the company can monitor customers’ use of the system in real time, making sure they are using it correctly and automatically storing the details of each weld in K-TIG’s computers.

“It’s a really exciting development,” Mr Williams said.

So far though, K-TIG hasn’t been profitable, reporting a $1.7 million loss for the 12 months to June 30, up from a $458,302 loss the previous year.

It had $1 million in revenue, down from $2.2 million in FY18, as it transitions to its welding-as-a-service model.

Mr Williams said prospective investors are not going to be “blown out of the water” with the company’s revenue but the licensing model would give it a monthly recurring income.

K-TIG plans to backdoor list on Monday through Perth shell company Serpentine Technologies following a $7 million capital raise.

Shareholders will be hoping that precision welding is more successful than the corporate entity’s previous businesses.

It first listed as WA base metals explorer Magnolia Resources in 2012, then acquired an interior design e-commerce platform and changed its name to Whole New Home in 2015, and then changed its name to Kabuni the following year.

In 2017, Kabuni sold most of its assets to Print the Future, a new company owned by former chief executive Neil Patel, but Print the Future has failed to repay the $4.4 million promissory note, according to numerous ASX filings.

Advertisement

Understanding the Primary Difference between Seamless Pipes and ERW Stainless Steel Pipes

Pipes are ubiquitous and are pragmatically found in all industrial sectors majorly. The advent of rolling mill technology and its development during the first half of the nineteenth century also heralded in the industrial manufacture of tube and pipe. As the century was on the last leg of completion various processes became available for the manufacture of seamless pipes and tubes. As the production volume started increasing rapidly, the ongoing development and further improvement of the seamless techniques led to welded ERW tube being almost completely pushed out of the market.

As the requirements imposed on tubular products continued to increase, the associated manufacturing processes also started getting improved. There are lots of mechanical and operational differences these welded stainless steel pipes and MS seamless pipes have. Let's have a look.

Have A Look At The Key Differences Between Seamless Pipes And Stainless Steel Welded Pipes:

Whereas, ERW pipes are electric resistance welded pipes which are manufactured by rolling metal and which is then welded longitudinally across its length. They have a welded joint in its cross section.

Nowadays, the tube and pipe manufacturers of renowned brand like MS seamless pipe have a system in place that enables the production process from the steelworks to the finished tube that is continuously monitored and documented for total traceability. Also, they are effectively controlled on the basis of quality criteria. They also carry out mechanical and non-destructive tests stipulated in the relevant technical specifications by personnel from production control department which assures the pipes produced are of high quality and totally reliable.

So, if you are looking to buy seamless pipes for your specific industrial need then always buy it from an industrial megastore which assorts and sells only branded quality of seamless tubes like MS seamless pipes. There are more chances to get discount on these pipes, if you buy them online.

Robot welding firm K-TIG to debut on ASX

The world’s first welding-as-a-service company is set to launch its CSIRO-developed technology onto the ASX next week.

Adelaide-based K-TIG offers precision robotic welding that it claims saves time, materials and money.

Blue-chip firms GE, Siemens and Bilfinger are among clients in 20 countries already making use of a system that chief executive David Williams says can perform a three-hour tungsten inert gas (TIG) weld in just two or three minutes.

“In one pass, we can put the (welding) arc through the keyhole,” Mr Williams said.

“There’s a lot of advantage for fabricators of stainless steel and more exotic metals.”

Unlike conventional TIG welding, the K-TIG or “keyhole TIG” system requires no edge bevelling of the materials to be welded together, and doesn’t use as much expensive filler material.

The system is being used for making pressure vessels, ISO tanks for shipping liquids, pressure vessels and stainless steel welded pipes, the company says.

Mr Williams said one client in Argentina used it to deliver 15km of pipeline 550 days ahead of schedule.

K-TIG was developed by CSIRO’s former Division of Manufacturing Technologies and was named Australia’s industrial product of the year in 2014.

Mr Williams said that people in the industry have at first scoffed at the company’s “welding as a service” model.

But when they see customers paying only a variable fee depending on the size of the task, “they say that’s fantastic – there’s no one doing this in the industry,” Mr Williams said

TIG welding is complex and more difficult to master than other types of welding, and welders used to working with exotic materials such as titanium and various alloys tend to be in their fifties, Mr Williams said.

“All the people that used to do welding of exotic materials are disappearing,” he said.

The K-TIG system lets customers in high-wage countries like the US, UK and Australia compete with Asia, he said.

“They can compete on cost, with better quality and faster time of delivery,” Mr Williams said.

The K-TIG system is also an “internet of things” device, communicating with the K-TIG headquarters in Adelaide.

Mr Williams said the company can monitor customers’ use of the system in real time, making sure they are using it correctly and automatically storing the details of each weld in K-TIG’s computers.

“It’s a really exciting development,” Mr Williams said.

So far though, K-TIG hasn’t been profitable, reporting a $1.7 million loss for the 12 months to June 30, up from a $458,302 loss the previous year.

It had $1 million in revenue, down from $2.2 million in FY18, as it transitions to its welding-as-a-service model.

Mr Williams said prospective investors are not going to be “blown out of the water” with the company’s revenue but the licensing model would give it a monthly recurring income.

K-TIG plans to backdoor list on Monday through Perth shell company Serpentine Technologies following a $7 million capital raise.

Shareholders will be hoping that precision welding is more successful than the corporate entity’s previous businesses.

It first listed as WA base metals explorer Magnolia Resources in 2012, then acquired an interior design e-commerce platform and changed its name to Whole New Home in 2015, and then changed its name to Kabuni the following year.

In 2017, Kabuni sold most of its assets to Print the Future, a new company owned by former chief executive Neil Patel, but Print the Future has failed to repay the $4.4 million promissory note, according to numerous ASX filings.

Advertisement